Ortofon OM PRO S Pick-up Single Sæt

Baseret på 23 anmeldelser

Ortofon OM Pro S Single Sæt

 
  • ProS is perfect for newcomers on the DJ scene who want to start off with decent, but not too expensive equipment. The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable. No matter what the application, the Pro S provides remarkable versatility for virtually any setting.
 
  • The sound quality is absolutely not to worry about. The Pro S is a consistent performer and a fine all-arounder!

329 kr.

Vi prismatcher i
Tilbehør der passer til
stk.
Afhent på lager 0,-
GLS - pakkeshop 59,-
GLS - Erhvervslevering 59,-
GLS - hjemmelevering 99,-
Danske fragtmænd 299,-

Læs mere om levering





  • Med dette sæt får du en Ortofon OM PRO S med tilhørende PRO S nål
 
  • PRO S er perfekt til nybegyndere på DJ scene, der ønsker at starte med anstændigt, men ikke for dyrt udstyr
 
  • PRO S har en sfærisk diamant stylus som minimerer ridser og en solid cantilever, der kan overleve hektisk aktivitet på drejeskiven



Ortofon OM Pro S Single Sæt

 
  • ProS is perfect for newcomers on the DJ scene who want to start off with decent, but not too expensive equipment. The Pro S has a spherical diamond stylus which minimizes scratching and a solid cantilever which can survive hectic activity at the turntable. No matter what the application, the Pro S provides remarkable versatility for virtually any setting.
 
  • The sound quality is absolutely not to worry about. The Pro S is a consistent performer and a fine all-arounder!


Varenr.: ORT-01311060
EAN: 5705796020779
Vægt 0,1
• Output voltage at 1000Hz, 5cm/sec.: 5 mV
• Channel balance at 1kHz: 2 dB
• Channel separation at 1kHz: 20 dB
• Channel separation at 15 kHz: 15 dB
• Frequency range at -3dB: 20-20.000 Hz
• Frequency response: 20-18.000 Hz +/- 2 dB
• Tracking ability at 315 Hz at recommmende tracking force: 70 μm
• Compliance, dynamic lateral: 7 μm/m N
• Stylus type: Spherical
• Stylus tip radius: R 26 μm
• Tracking force range: 3,0-5,0 g (30-50 mN)
• Tracking force recommended: 4,0 g (40 mN)
• Tracking angle: 20º
• Internal impedance, DC resistance: 750 Ohm
• Internal inductance: 450 mH
• Recommended load resistance: 47 kOhm
• Recommended load capacitance: 200-600 pF
• Cartridge weight: 5 g
• Replacement stylus unit: Pro S