Cameo CLPixBar 500 PRO LED Bar

Baseret på 4 anmeldelser

Vi matcher udlandets lave priser - og giver dansk kundeservice

2.699 kr. (Inkl. moms)
Fri fragt (op til 20 kg.)
Prismatch i
Bestillingsvare: Leveringstid 5-8 arbejdsdage
100% dansk netbutik


  • 6 x 12W RGBWA + UV LEDs
  • Enkelt pixel kontrol skaber chase effekter
  • Farvetemperatur kontrol
  • Robust aluminiumshus



Professional 6 x 12 W RGBWA+UV LED Bar

The Cameo PixBar 500 PRO is a wide-angle, convection-cooled LED bar for professional use, equipped with 6 super-bright 12 Watt RGBWA+UV LEDs. It operates absolutely noiselessly and is flicker-free due to its high refresh rate of 3,600 Hz.

In addition to the almost unlimited range of colours that can be varied in temperature as well as the macros that are aligned with LEE filters, the PixBar offers 3 shades of white and 4 selectable dimmer curves. With the Single Pixel Control, all LEDs can also be individually adjusted to achieve impressive Chase effects.

The fully RDM-enabled PixBar 500 PRO can communicate bidirectionally with RDM-controllers, to provide the address, status, and all parameters of the device. Naturally, the light bar can also be controlled via the standard DMX protocol in 6 control modes or used as a standalone, master and slave; it features 14 automatic modes and a built-in microphone for sound control. A backlit display and 4 buttons are used for manual operation.

The aluminium housing of the Cameo PixBar 500 PRO is equipped with both 3- and 5-pin input and output sockets for the DMX-signal, as well as with Neutrik Powercon mains connectors. The light bar can be used with all mains voltages from 110 to 240 volts and comes with a mounting bracket and a frost filter to provide a uniform, glare-free light.



  • 6 ultra-bright 12 W RGBWA+UV LEDs
  • Single Pixel Control for effective Chase effects
  • Silent operation thanks to convection cooling
  • Flicker-free
  • Professional 3- and 5-pin DMX sockets and Neutrik powerCon mains connector
  • Fully RDM-enabled
  • 6 DMX modes plus operation as a standalone, master or slave
  • Frost filter for uniform, glare-free light
  • 4 adjustable dimmer curves
  • Colour temperature correction
  • 3 preset shades of white: warm white, cool white, white
  • Sturdy aluminium housing



Product number: CLPIXBAR500PRO
Product type: Light bar
Type: Washer
Colour spectrum: RGBWA+UV
Number of LEDs: 6
LED type: 12 W
Dispersion: (1120 lx) 41°, (600 lx) 23°
Refresh rate: 3600Hz
DMX input: XLR 5-pin male, XLR 3-pin male
DMX output: XLR 3-pin female, XLR 5-pin female
DMX mode: 42-channel, 38-channel, 2-channel, 12-channel, 6-channel 1, 6-channel 2, 8-channel
DMX Functions: auto programs, colour macro, Colour temperature correction, Dimmer, sound programs, Single Pixel Control, strobe
Standalone modes: strobe, sound programs, auto programs, static colour
Controls: mode, Value Up, Value Down, Enter
Indicators: LC display
Operating voltage: 110 V AC - 240 V AC / 50 – 60 Hz
Power consumption: 90W
Power connector: Neutrik PowerCon
Housing material: die-cast aluminium
Cooling: Convection
Cabinet colour: black
Illuminance: 1190lx @ 1m
Dimensions without mounting bracket
Width: 450mm
Height: 120mm
Depth: 75mm
Weight: 4kg